Tico S

Adjustamounts

Pipe Grips

Clip Strips

Bond Slip Pads

Structural Bearings

 

Structural Bearings

Our TICO Structural Bearings products have a long history of success in attenuating the transmission of ground borne noise and vibration into buildings and other structures where these pose a problem.

TICO Structural Bearings provide a maintenance free acoustic/resilient barrier for the isolation of structures from ground borne noise and vibration.

Key Advantages

  • Supplied in virtually any size to suit specific conditions, so that the bearings can be engineered to give the required response .
  • Can be supplied in a variety of construction methods from modular bearings on pile caps/column heads to continuous bearings in strip footings.
  • Bearings can be fitted above or below ground level to suit the engineers' requirements.
  • Available in a number of grades.
  • Suitable for a wide variety of applications from large buildings to light internal structures.
  • All bearings manufactured from high quality constituents.

 

TICO CV/CA HIGH STRESS BEARINGS

Vulcanised laminates of polychloroprene based rubber, enhanced by the inclusion of cellular particles and alternated with reinforcing plies of high tensile fabric.

CV/CA bearings have a working stress range of 4.5 MN/m2 to 7 MN/m2.

Applications

High load bearing applications such as high rise buildings, office complexes, luxury flats, tower blocks,  cinema's, theatre's etc.

 

TICO CV/M MEDIUM STRESS BEARINGS

This medium stress structural bearing uses the same high quality compound as is used in TICO CV/CA but is unreinforced except in the 50mm thick version, which has central reinforcement of high tensile fabric.

CV/M bearings have a working stress range of 1 MN/m2 to 1.4 MN/m2.

Applications

Medium load bearing applications such as offices, private dwellings, oil rig modules, floating floors, cinema's etc.

 

TICO CV/LF LOW STRESS BEARINGS

This range of low stress bearings is supplied in two grades, both moulded from polychloroprene compounds in varying configurations.

CV/LF/N bearings have a working stress range of 0.35 MN/m2 to 0.7 MN/m2 CV/LF/B bearings have a working stress range of 0.04 MN/m2 to 0.07 MN/m2.

Applications

Recording and sound studios, floating floors, anechoic chambers, etc.